Gland càball meatailt ioma-inntrigidh RSKM-NPT-NXD
Paramadair Teicnigeach
Riaghladh còdadh gland càball meatailt sreath SKM.
| Chan eil. | Còd | Tuairisgeul Còd | Tuairisgeul |
| 1 | RSKM RSKM1 RSKM2 | gland càball meatailt (ceanglaiche càball: claw plastaig + ròn rubair) gland càball meatailt (ceanglaiche càball: ròn rubair làn-troimhe a-mhàin)
| RSKM1: Le ròn leth-troimhe seòrsa fiaclan RSKM2: Le ròn làn-seòrsa fiaclan |
| 2 | D RA EMV.SP EMV.SC D-EMV XXXX | Gland càball dùbailte Gland càball ceart-cheàrnach Gland càball dìon an earraich Gland càball EMC Gland càball dìon glas dùbailte Gland càball cumanta gun chòd | RSKM-D-M16A..... RSKM-RA-M16A..... RSKM-EMV.SP-M16A..... RSKM-EMV.SC-M16A..... RSKM-D-EMV-M16A..... RSKM-M16A.... |
| 3 | M P N G | Snàithle Metric inbhe na Gearmailt Inbhe Ameireaganach inbhe Bhreatainn | RSKM-M16A.... RSKM-P9A..... RSKM-N1/2A..... RSKM-G1/4A.... |
| 4 | 16 | Sònrachadh Snàthainn | |
| 5 | *2.0 | Pitch snàthainn Metric gun chòd ma thèid a dhearbhadh sa chlàr. | RSKM-M16 *1.5 A.....RSKM-M16A.... RSKM-M16 * 2.0A ..... riatanach |
| 6 | A B C | Raon càball aithneachaidh
| RSKM-M16A ..... Raon càball: 4-8 RSKM-M16B ..... Raon càball: 2-6 RSKM-M16C ..... Raon càball: 5-10 |
| 7 | 2x6(NxD) N1xD1+N2xD2 | Ioma-inntrigeadh leis an aon spec càball. Ioma-inntrigeadh le diofar càball spec.Inntrigeadh singilte gun chòd | RSKM-M16A-3X6 .. D Ø6mmx3pcs RSKM-M16A-1X2+2X6..... D Ø2mmx1pcs, D Ø 6mmx2pcs |
| 8 | L | Leudaich an t-snàthainn An fheadhainn as cumanta gun chòd | RSKM-M16A-1X2+2X6-LLC..... RSKM-M16A-1X2+2X6-LC.... |
| 9 | C AL | Pràis, Nickel plated AL alloy | RSKM-M16A-1X2+2X6-LC..... RSKM-M16A-1X2+2X6-AL... |
| 10 | O | O-fhàinne | RSKM-M16A-1X2+2X6-LCO... |
| 11 | M | Nut (roghainneil) | RSKM-M16A-1X2+2X6-OM |
Dòigh Taghaidh
1 、 Dearbhaich Cable Stuth.
2 、 Dearbhaich an raon càball acc.gu trast-thomhas càball.
3 、 Feuch an dearbhaich thu an snàthainn spec.acc.to trast-thomhas an tollaidh troimhe.
Tuairisgeul
● Stuth: umha, Nickel plated.
● Stuth plastaig: PA6 no PA66.
● Stuth ròin: silica gel, EPDM no NBR.
● IP Ìre: Clampadh raon ， O-Ring ， IP68.
● Teòthachd Earranta: Earranta: -40 ℃ -100 ℃, 120 ℃ airson geàrr-ùine.
● Bathar Feart: A 'ceangal nas rèidh le O-ring groove.Protecting ceangal sàbhailte le bhith a' cleachdadh leasaichte dìon sealings.
| Nì Àir. | Sònrachadh Snàthainn. | Stuth | Raon Càbaill (Φ) | Snàthainn OD(AG) | Fad Snàthainn (GL) | Àirde (H) | Wrench (SW1) mm | Spinneadair (SW2) mm | Stàladh meud toll mm
| Staid |
| RSKM-M16A-4×1.4-C-OM | M16 × 1.5 | CU | 4 × 1.4 | 16 | 7 | 21 | 20 | 20 | F16.2-Ф16.4 | D |
| RSKM-M16A-2 × 3-C-OM | M16 × 1.5 | CU | 2 × 3 | 16 | 7 | 21 | 20 | 20 | F16.2-Ф16.4 | D |
| RSKM-M18A-2 × 3-C-OM | M18 × 1.5 | CU | 2 × 3 | 18 | 7 | 21 | 20 | 20 | F18.2-F18.4 | D |
| RSKM-M18A-4×3-C-OM | M18 × 1.5 | CU | 4 × 3 | 18 | 7 | 21 | 20 | 20 | F18.2-F18.4 | D |
| RSKM-M20A-3×2.5-C-OM | M20 × 1.5 | CU | 3 × 2.5 | 20 | 8 | 22 | 24 | 24 | Ф20.2-Ф20.4 | D |
| RSKM-M20A-6×3-C-OM | M20 × 1.5 | CU | 6 × 3 | 20 | 8 | 22 | 24 | 24 | Ф20.2-Ф20.4 | D |
| RSKM-M22A-2 × 6-L8-C-OM | M22 × 1.5 | CU | 2 × 6 | 22 | 8 | 24 | 24 | 24 | Ф22.2-Ф22.4 | D |
| RSKM-M25A-4×6-C-OM | M25 × 1.5 | CU | 4 × 6 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-M25A-3×7-L8-C-OM | M25 × 1.5 | CU | 3 × 7 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-M25A-2 × 8-C-OM | M25 × 1.5 | CU | 2 × 8 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-H-M25A-3×7+1×8.5-C | M25 × 1.5 | CU | 3×7+1×8.5 | 25 | 15 | 26 | 34 | 33 | Ф25.2-Ф25.4 | D |
| RSKM-M32A-6×6.5-C-OM | M32 × 1.5 | CU | 6 × 6.5 | 32 | 10 | 31 | 40 | 40 | F32.2-F32.4 | D |
| RSKM-M32A-4×9-L10-C-OM | M32 × 1.5 | CU | 4 × 9 | 32 | 10 | 33 | 40 | 40 | F32.2-F32.4 | D |
| RSKM-M32A-2×4+1×8.5-C-OM | M32 × 1.5 | CU | 2×4+1×8.5 | 32 | 10 | 31 | 40 | 40 | F32.2-F32.4 | D |
| RSKM-M40A-5×9-C-OM | M40 × 1.5 | CU | 5 × 9 | 40 | 10 | 37 | 50 | 50 | F40.3-Ф40.5 | D |
| RSKM-M40A-7×9-C-OM | M40 × 1.5 | CU | 7 × 9 | 40 | 10 | 37 | 50 | 50 | F40.3-Ф40.5 | D |
| RSKM-M40A-2 × 15-C-OM | M40 × 1.5 | CU | 2 × 15 | 40 | 10 | 37 | 50 | 50 | F40.3-Ф40.5 | D |
| RSKM-M63A-6×12-C-OM | M63 × 1.5 | CU | 6 × 12 | 63 | 11 | 38 | 67 | 67 | F63.3-F63.5 | D |
| RSKM-M63A-4×19-C-OM | M63 × 1.5 | CU | 4 × 9 | 63 | 11 | 38 | 67 | 67 | F63.3-F63.5 | D |
| RSKM-M16A-4×1.4-C-OM | M16 × 1.5 | CU | 4 × 1.4 | 16 | 7 | 21 | 20 | 20 | F16.2-Ф16.4 | D |
| RSKM-M16A-2 × 3-C-OM | M16 × 1.5 | CU | 2 × 3 | 16 | 7 | 21 | 20 | 20 | F16.2-Ф16.4 | D |
| RSKM-M18A-2 × 3-C-OM | M18 × 1.5 | CU | 2 × 3 | 18 | 7 | 21 | 20 | 20 | F18.2-F18.4 | D |
| RSKM-M18A-4×3-C-OM | M18 × 1.5 | CU | 4 × 3 | 18 | 7 | 21 | 20 | 20 | F18.2-F18.4 | D |
| RSKM-M20A-3×2.5-C-OM | M20 × 1.5 | CU | 3 × 2.5 | 20 | 8 | 22 | 24 | 24 | Ф20.2-Ф20.4 | D |
| RSKM-M20A-6×3-C-OM | M20 × 1.5 | CU | 6 × 3 | 20 | 8 | 22 | 24 | 24 | Ф20.2-Ф20.4 | D |
| RSKM-M22A-2 × 6-L8-C-OM | M22 × 1.5 | CU | 2 × 6 | 22 | 8 | 24 | 24 | 24 | Ф22.2-Ф22.4 | D |
| RSKM-M25A-4×6-C-OM | M25 × 1.5 | CU | 4 × 6 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-M25A-3×7-L8-C-OM | M25 × 1.5 | CU | 3 × 7 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-M25A-2 × 8-C-OM | M25 × 1.5 | CU | 2 × 8 | 25 | 8 | 26 | 30 | 30 | Ф25.2-Ф25.4 | D |
| RSKM-H-M25A-3×7+1×8.5-C | M25 × 1.5 | CU | 3×7+1×8.5 | 25 | 15 | 26 | 34 | 33 | Ф25.2-Ф25.4 | D |
| RSKM-M32A-6×6.5-C-OM | M32 × 1.5 | CU | 6 × 6.5 | 32 | 10 | 31 | 40 | 40 | F32.2-F32.4 | D |
| RSKM-M32A-4×9-L10-C-OM | M32 × 1.5 | CU | 4 × 9 | 32 | 10 | 33 | 40 | 40 | F32.2-F32.4 | D |
| RSKM-M32A-2×4+1×8.5-C-OM | M32 × 1.5 | CU | 2×4+1×8.5 | 32 | 10 | 31 | 40 | 40 | F32.2-F32.4 | D |
| RSKM-M40A-5×9-C-OM | M40 × 1.5 | CU | 5 × 9 | 40 | 10 | 37 | 50 | 50 | F40.3-Ф40.5 | D |
| RSKM-M40A-7×9-C-OM | M40 × 1.5 | CU | 7 × 9 | 40 | 10 | 37 | 50 | 50 | F40.3-Ф40.5 | D |
| RSKM-M40A-2 × 15-C-OM | M40 × 1.5 | CU | 2 × 15 | 40 | 10 | 37 | 50 | 50 | F40.3-Ф40.5 | D |
| RSKM-M63A-6×12-C-OM | M63 × 1.5 | CU | 6 × 12 | 63 | 11 | 38 | 67 | 67 | F63.3-F63.5 | D |
| RSKM-M63A-4×19-C-OM | M63 × 1.5 | CU | 4 × 9 | 63 | 11 | 38 | 67 | 67 | F63.3-F63.5 | D |
